PRODUCT DESCRIPTION
The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
Features
• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires.)
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• Designed to support DJI Digital FPV.
FC // SucceX-D F7 TwinG
MCU: 216MHz STM32F722
Gyro：2x ICM20689
Baro: YES
Blackbox：32MB
Betaflight OSD: YES
BEC: 5V 2.5A / 9V 2.5A
Current sensor scale: 100
Inverter for SBUS input (UART2-RX)
Smartaudio & Tramp VTX protocol supported
Beeper pad : Yes
RSSI input pad: No
UARTs：5
Motor outputs: 8
8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry：RX5
Input voltage：recommended 2-6S, MAX 8S
Firmware target: IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 36*36mm
Weight: 7.5g
USB type-C
Package included:
- SucceX-D F7 TwinG Flight Controller (HD Version)
NOTE:
The DJI Air Unit is not included in the package.
発送：
ゆうパック・ゆうパケットがお選びいただけます。
数量によっては、ゆうパケットの利用が出来ない場合がございます。
送料等については、お気軽にお問い合わせください。
ゆうパック
送料はこちらでご確認下さい。
ゆうパケット
送料はこちらでご確認下さい。
正規輸入販売店
メーカーの製品保証については弊社にご相談ください。
※商品の仕様は予告なく変わる場合がございます。
在庫あり・国内発送
