GNSS & COMPASS M9N-5883
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
More details about the NEO-M9N, pls check out
u-blox NEO-M9N page
Specifications
GNSS u-blox NEO-M9N (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass QMC5883L
Patch antenna 25*25*4mm
Input voltage range: 4~6V (5V pad/pin)
Power consumption: 50mA
UART baudrate: 38400 default
Operating Temperatures: -20~80 °C
UART(TX, RX) interface for GNSS NEO-M9N
I2C(DA, CL) interface for Compass QMC5883L
JST-GH-6P connector
3.3V Power LED, Red
GNSS PPS LED, Green, blinking(1Hz) when GNSS has 3D fixed
32mm*32mm*10mm
14.5g
Includes
1x M9N-5883
1x JST-GH-6P to JST-GH-6P 20cm silicon wire
Wiring and settings
M9N-5883 5V to Flight controller 4~6V
M9N-5883 RX to Flight controller UART_TX
M9N-5883 TX to Flight controller UART_RX
M9N-5883 CL to Flight controller I2C_SCL
M9N-5883 DA to Flight controller I2C_SDA
M9N-5883 G to Flight controller GND
Compass Alignment(Arrow forward and flat mounting):
INAV/BetaFLight: CW 270° Flip when flight controller arrow is facing forward also.
Ardupilot/Mission Planner: Rotation None.
Protocol: Ublox or NEMA
Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
The scratches on ceramic antenna are the result of tuning the antenna.
u-center Windows
STL and STEP
M9N-5883_step.zip
M9N-CAN_shell_STL.zip
写真1
写真2
写真3
写真4
発送：
ゆうパック・ゆうパケットがお選びいただけます。
数量によっては、ゆうパケットの利用が出来ない場合がございます。
送料等については、お気軽にお問い合わせください。
ゆうパック
送料はこちらでご確認下さい。
ゆうパケット
送料はこちらでご確認下さい。
正規輸入販売店
メーカーの製品保証については弊社にご相談ください。
※商品の仕様は予告なく変わる場合がございます。
